Maxim Integrated (MAX3430ESA+) Transceiver RS485, 2.97V-3.63V supply

Product OverviewThe MAX3430ESA+ is a fault-protected fail-safe RS-485 Transceiver features ±80Vprotection from overvoltage signal faults on communication bus lines. Eachdevice contains one driver and one receiver and the output pins can withstandfaults, with respect to ground, of up to ±80V. Even if the faults occur when thetransceiver is active, shut down or powered off, the device will not be damaged.The MAX3430 operates from a 3.3V supply and features a slew-rate-limited driverthat minimizes EMI and reduces reflections caused by improperly terminatedcables, allowing error-free data transmission at data rates up to 250kbps. TheMAX3430 has a 1/4-unit-load receiver input impedance allowing up to 128transceivers on a single bus and features fail-safe circuitry, which guaranteesa logic-high receiver output when the receiver inputs are open.Internal slew-rate limiting250kbps Data rateAllows up to 128 transceivers on the bus-7 to +12V Common-mode input voltage rangeTrue fail-safe inputsHot-swap input structure on DEIndustrial Control Local Area Networks; Lighting Systems; Multimaster RS-485Networks; PROFIBUS Applications; RS-422/RS-485 CommunicationsApplicationsCommunications & Networking, Lighting, IndustrialProduct InformationDevice Type: TransceiverIC Interface Type: RS485No. of Drivers: 1DriversNo. of Receivers: 1ReceiversSupply Voltage Min: 2.97VSupply Voltage Max: 3.63VDriver Case Style: SOICNo. of Pins: 8PinsOperating Temperature Min: -40°COperating Temperature Max: 85°CProduct Range: -Automotive Qualification Standard: -MSL: MSL 1 - Unlimited