Peacefair PZEM-026 AC Voltage and Current Meter Dual Digital Display 40~400V/100A High-precision Dig
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615100379
Error adjustment:
The product is 100% calibrated before leaving the factory, and the user can also manually adjust the error by himself. The method is as follows: Step 1: Long press the button (about 3 seconds) until the digital digit on the screen flashes, then release the button; Step 2: Digital flashing means entering the error adjustment state, the digits flashing cyclically, followed by: high voltage>Voltage middle position>voltage low position>voltage decimal point>current high position>current middle position>current low position>current decimal point. Flashing represents the current adjustable digit. Short press the button to adjust the value (digit 0-9 cycle, decimal point shift); Step 3: After the adjustment is completed, press and hold the button (about 3 seconds), the screen displays PASS and returns to the normal display interface, indicating that the adjustment is successful.
Feature:
Voltage measurement range: 40-400V Measurement accuracy: ±1% Display format: <100V Display mode: 80.0V, >=100V Display mode: 220V Current measurement range: 0-100A Starting current: 0.02A Measurement accuracy: ±1% Display format: <10A (display method: 1.00A), <100A (display method: 10.0A), >=100A (display method: 100A)
Package includes:
1 x Meter
The product is 100% calibrated before leaving the factory, and the user can also manually adjust the error by himself. The method is as follows: Step 1: Long press the button (about 3 seconds) until the digital digit on the screen flashes, then release the button; Step 2: Digital flashing means entering the error adjustment state, the digits flashing cyclically, followed by: high voltage>Voltage middle position>voltage low position>voltage decimal point>current high position>current middle position>current low position>current decimal point. Flashing represents the current adjustable digit. Short press the button to adjust the value (digit 0-9 cycle, decimal point shift); Step 3: After the adjustment is completed, press and hold the button (about 3 seconds), the screen displays PASS and returns to the normal display interface, indicating that the adjustment is successful.
Feature:
Voltage measurement range: 40-400V Measurement accuracy: ±1% Display format: <100V Display mode: 80.0V, >=100V Display mode: 220V Current measurement range: 0-100A Starting current: 0.02A Measurement accuracy: ±1% Display format: <10A (display method: 1.00A), <100A (display method: 10.0A), >=100A (display method: 100A)
Package includes:
1 x Meter
