PZEM-004T 0-100A AC220 TTL Serial Communication Module Voltage Current... (CURRENT: 100ACLOSEDCTUSB)
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615101786
SELECTED OPTION:
CURRENT: 100ACLOSEDCTUSB
| Function | Measuring range | Starting current/power | Resolution | Measurement accuracy | Display format | ||
| 10A | 100A | 10A | 100A | ||||
| Voltage | 80-260V | ? | 0.1V | 0.5% | ? | ||
| Current | 0-10A | 0-100A | 0.01A | 0.02A | 0.001A | 0.5% | <1000W displays 1 decimal place, such as: 999.9W; >=1000W, only displays integers, such as: 1000W |
| Active power | 0-2.3KW | 0-23KW | 0.4KW | 0.1W | 1% | ? | |
| Power factor | 0.00-1.00 | ? | 0.01 | 1% | ? | ||
| Frequency | 45HZ-65HZ | ? | 0.1HZ | 0.5% | ? | ||
| Active energy (power clear, software clear) | 0-9999.99KWH | ? | 1WH | 0.5% | <10kWh, the display unit is Wh (1kWh=1000 Wh), such as: 9999Wh; >=10kWh, display unit is kWh, such as: 9999.99kWh | ||
| Power overrun alarm | The active power threshold can be set, and the alarm state is set when the measured active power exceeds the set threshold. | ||||||
| Communication Interface | TTL interface | ||||||
| Power supply | The single-phase power frequency grid power supply is supplied to the main circuit through the RC capacitor, and the TTL output communication interface is isolated from the main circuit optocoupler and is a passive output. An external 5V power supply is required for communication. | ||||||
| Note | The TTL interface of this module is a passive interface. It must be externally supplied with 5V power supply. That is, all four ports must be connected (5V, RX, TX, GND) during communication, otherwise communication cannot be performed. | ||||||
| Operating temperature | -20?ﾣC~+60?ﾣC | ||||||
Package includes:
1 x?TTL Serial Communication Module?
