Revov Battery Monitoring Cable for Revov LifePO4 Lithium R100, R200 | USB to RJ12 | Revov Battery...

Revov Battery Monitoring Cable for Revov LifePO4 Lithium R100, R200 | USB to RJ12 | Revov Battery with RJ12 RS232 Port

This cable is used to monitor your Revov LifePO4 Lithium batteries as below via Solar Assistant or PBMSTools battery viewing application. From the product drop down you can choose the cable length for your battery. The Revov battery must have an RJ12 (6 pin RS232) Port.

Specifications:

• Constructed Cable uses FTDI FT232 Chipset for USB to RS232 depending on stock we have. If a specific chipset needed e.g. Prolific PL2303 or CH340 USB to RS232 please specify it on order or call us before ordering.
• Supports baud rates up to 1.2M bps.

This cable has a modular design and designed by us with the reasons below in mind:

• Flexibility : The Cable length, if your application changes, can be extended easily by using a RJ45 Network coupler and standard ethernet network cable. The wiring on the DB9 to RJ45 Converter can be changed if you have technical knowledge to adapt to any inverter or battery for firmware updates / monitoring. We can also adapt wiring ON REQUEST for any inverter/solar batteries if a wiring diagram is supplied.
• Maintainability : If one part of the cable fails or damaged only the specific part of the cable needs to be replaced and not the total cost of the cable.
• Reusability : The modular parts can be re-used on other applications such as USB to DB9 Serial Communication or other USB to Network Configurations if pin layout customized.

When using this Revov USB to RJ12 Battery Cable with Solar Assistant App please select the USB Serial RS232/RS485 Option as below on your Solar Assistant App to ensure the app can communicate with the battery correctly.

Example below when using PBMSTools Windows 10/11 Application for checking Battery Cells and State of Charge / State of Health etc: