Securnix Video Ground Loop Isolator, BNC male to terminal block with 15cm mini coax cable
Twisted Pair Video Ground Loop Isolator GP100
Product Overview
The Securnix Twisted Pair Video Ground Loop Isolator GP100 are passive devices which reduce Ground Loop Interference with CCTV signals and can easily install in a new or added to existing systems. It is useful where a video signal is transmitted via cable between points with different ground potentials. Differences in ground potentials are typically caused by unbalanced power line loads.
Features:
BNC male to terminal block with 15cm mini coax cable
Passive type, no power need
Hi Performance to eliminate ground loop problem
Low video loss, Bandwidth: 20hz -11Mhz ,+0/-3Db
Prevents video-signal distortion caused by video ground loops
Eliminates picture tearing, cross talk and rolling
Prevents power cables laid by others interfering with the CCTV system
Specifications:
Insertion Loss:0.5dB
Frequency Response:20HZ- 10Mhz,+0/-3dB
Input Resistance:75 ohm
Output Resistance:100 ohm
Isolation Voltage:600VDC (Min)
Insulation Resistance:100M Ohm
Transient Voltage Suppressor:12 Vrms
Material ABS Black
Dimensions (mm)-72x28x22
Weight: 156g/pair
Installation View The Video Ground Loop Isolator should be installed where runs of video cable are known to have ground loops. It must be installed in the video cable that has come directly from the camera, but before the cable has been connected to anything else.
If several video cameras come from the same area, fix a Video Ground Loop Isolator In every cable, or a ground loop will still remain
NOTE: Items are only transferred from the warehouse and shipped for delivery upon order confirmation and payment. Items deemed with incorrect listing prices will be cancelled and refunded immediately.
