TTGO TS V1.4 ESP32 1.8 inch TFT SD Card MPU9250 WiFi Bluetooth Module
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
SPS0391
Bob Shop ID
602483195
Hardware Specifications
1. Chipset: ESPRESSIF-ESP32-PCIO-D4 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor
2. FLASH: QSPI flash/SRAM, up to 4 x 16 MB
3. SRAM: 520 kB SRAM
4. KEY: Reset, IO34, IO35, IO39
5. Display: 1.44 /1.8 inch ST7735 LCD TFT display
6. Power indicator lamp: Red
7. USB to TTL: CP2104
8. Modular interface: SD card, UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, capacitor touch sensor, ADC, DACLNA pre-amplifier
9. Working voltage: 2.3V-3.6V
10. Working current: About 60mA
11. Sleep current: 1mA
12. Working temperature range: -40 degree C ~ +85 degree C
Power Supply Specifications
1. Power Supply: USB 5V/1A
2. Charging current: 500mA
3. Battery: 3.7V lithium battery(not inlcuded)
Wi-Fi Description
1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC
2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval
3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M)
4. Transmit Power: 22dBm
5. Communication distance: 300m
Bluetooth Description
1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard
2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2&Class-3 emitter AFH
3. Audio frequency: CVSD&SBC audio frequency
Software specification Description
1. Wifi Mode: Station/SoftAP/SoftAP+Station/P2P
2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS
3. Encryption Typ:e AES/RSA/ECC/SHA
4. Frmware upgrade: UART download/OTA, Through network/host to download and write firmware
5. Software Development: Support cloud server development / SDK for user firmware development
6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT
7. User Configuration: AT + Instruction set, cloud server, android/iOSapp
OS: FreeRTOS
SST7735 Description
1. Size: 1.8 inch diagonal LCD TFT display
2. Resolution: 128x128/160x80 resolution, 16-bit/18-bit (262,144) color
3. Voltage Onboard: 3.3V at 150mA LDO regulator
4. Bus 5 wire SPI digital interface: CS:16, A0:17, SDA:23, SCK:5, RST:9
5. Dissipation Current draw is based on LED backlight usage: with full backlight draw is ~25mA
Package list
1. TTGO TS ESP32 Module x 1
2. Power cable x 1
1. Chipset: ESPRESSIF-ESP32-PCIO-D4 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor
2. FLASH: QSPI flash/SRAM, up to 4 x 16 MB
3. SRAM: 520 kB SRAM
4. KEY: Reset, IO34, IO35, IO39
5. Display: 1.44 /1.8 inch ST7735 LCD TFT display
6. Power indicator lamp: Red
7. USB to TTL: CP2104
8. Modular interface: SD card, UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, capacitor touch sensor, ADC, DACLNA pre-amplifier
9. Working voltage: 2.3V-3.6V
10. Working current: About 60mA
11. Sleep current: 1mA
12. Working temperature range: -40 degree C ~ +85 degree C
Power Supply Specifications
1. Power Supply: USB 5V/1A
2. Charging current: 500mA
3. Battery: 3.7V lithium battery(not inlcuded)
Wi-Fi Description
1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC
2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval
3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M)
4. Transmit Power: 22dBm
5. Communication distance: 300m
Bluetooth Description
1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard
2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2&Class-3 emitter AFH
3. Audio frequency: CVSD&SBC audio frequency
Software specification Description
1. Wifi Mode: Station/SoftAP/SoftAP+Station/P2P
2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS
3. Encryption Typ:e AES/RSA/ECC/SHA
4. Frmware upgrade: UART download/OTA, Through network/host to download and write firmware
5. Software Development: Support cloud server development / SDK for user firmware development
6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT
7. User Configuration: AT + Instruction set, cloud server, android/iOSapp
OS: FreeRTOS
SST7735 Description
1. Size: 1.8 inch diagonal LCD TFT display
2. Resolution: 128x128/160x80 resolution, 16-bit/18-bit (262,144) color
3. Voltage Onboard: 3.3V at 150mA LDO regulator
4. Bus 5 wire SPI digital interface: CS:16, A0:17, SDA:23, SCK:5, RST:9
5. Dissipation Current draw is based on LED backlight usage: with full backlight draw is ~25mA
Package list
1. TTGO TS ESP32 Module x 1
2. Power cable x 1