Ucan Board Based On Stm32f072 Usb to Can Adapter Support with Canable / Candlelight / Klipper Firmw

Features: Based on STM32F072, Type-C USB socketSupports CAN2.0A and B, rates up to 1MCompatible with CANable, Support with CAnable \/ CandleLight \/ Klipper firmware3-pin screw terminal: CANH, CANL, GND, Jumper to enter bootloader for firmware updatesOnboard 120R termination default or Jumper to enable\/disable terminationAbout the Products:UCAN is a small low-cost USB to CAN adapter, compatible with CANable hardware. The UCAN enumerates as a virtual serial port on the computer and acts as a serial-line for the CAN bus interface. with the Candlelight firmware, UCAN is enumerated as the native CAN interface on Linux. The UCAN adapter is compatible with ARM-based embedded platforms such as , Zero, ODROID, BeagleBone, etc. At the same time, it can also be used as USB to CAN application on Klipper.Color: blackMaterial: plasticPackage Contents:1 x USB to CAN AdapterOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +\/- 1-3cm.