Waveshare 1.02 Inch e-Paper e-Ink Screen Module Bare Screen Optional Partial Refresh without Drive

Overview:

This is an E-Ink raw display, 1.02inch, 128??80 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features:

No backlight, keeps displaying last content for a long time even when power down

Ultra low power consumption, basically power is only required for refreshing

Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications:

Operating voltage: 3.3V

Interface: 3-wire SPI, 4-wire SPI

Outline dimension: 32.6mm ?? 18.6mm

Display size: 21.76mm ?? 14mm

Dot pitch: 0.175 ?? 0.17

Resolution: 128 ?? 80

Display color: black, white

Grey scale: 2

Full refresh time: 2s

Refresh power: 26.4mW(typ.)

Standby power: <0.017mW

Viewing angle: >170?ﾣ

PIN Function:

VCC: 3.3V/5V power input

GND: power ground

DIN: SPI communication M0SI pin

CLK: SPI communication SCK pin

CS: SPI chip select pin (active low)

DC: data/command control pin (high level indicates data, low level indicates command)

RST: External reset pin (low level reset)

BUSY: Busy output pin (means?low level busy)

Documents:

Package includes:

1 x?Bareboard?board