50A Dual-Channel H Bridge Motor Driver Module Robot Chassis Servo
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Get it now, pay later
Returns
Product information
Condition:
New
Location:
International
Bob Shop ID:
612372329
Description:
?
This drive module performs much better than MC33886 or L298 motor drive module. T
his drive module performs very well in terms of motor start speed and power efficiency. It can withstand high current overload.
This drive has a brake function, which can quickly stop the motor. And the operation is very easy. Its performance is better than drive module of MC33886 chips.
The drive module contains a full-bridge driver chip and MOSFET of low internal resistance.
The full-bridge driver IC minimizes the switching loss of MOSFET and improves power efficiency.
MOSFET driver chip has the hardware brake functions and power feedback function.
MOSFET is the current impact-resistant type, with an internal resistance of 0.003 Euro.
MOSFET channel can be opened quickly to improve the motor's speed curvature, and also brake the motor quickly.
This function can make the car start or stop quickly.
The drive module weighs 15 grams. It can work under the PWM duty cycle of 0% -98%, which a common drive module can not.
Size:6cm x 4.5cm x 1.9cm - 2.36inch x 1.77inch x 0.75inch.
?
Performance parameters:
?
limited Rated voltage: 5V-12V.
Rated current: 50A.
Peak Current: 100A.
Dimensions: length 6.05cm, Width 4.55cm.
Installation: screw connection. Mounting hole spacing: 5.5cm / 4cm (length-wise/width-wise).
?
Control Definition:
Rotate forward: EN = 1, RPWM = PWM, LPWM = 1, DIS = vacant??
Rotate reverse: EN = 1, RPWM = 1, LPWM = PWM, DIS = vacant?
Parking and brake: EN = 1, RPWM = 1, LPWM = 1, DIS = vacant?
Parking but not brake: EN = 0, RPWM = 1, LPWM = 1, DIS = vacant
Prohibit the use: EN = X, RPWM = X, LPWM = X, DIS = 1?
Motor and power wiring:
Package included:
?
1 x?50A motor drive module
?
?
?
?
?
?
?
, 
, 
, 
, 
, 
, 
, 
, 
?
This drive module performs much better than MC33886 or L298 motor drive module. T
his drive module performs very well in terms of motor start speed and power efficiency. It can withstand high current overload.
This drive has a brake function, which can quickly stop the motor. And the operation is very easy. Its performance is better than drive module of MC33886 chips.
The drive module contains a full-bridge driver chip and MOSFET of low internal resistance.
The full-bridge driver IC minimizes the switching loss of MOSFET and improves power efficiency.
MOSFET driver chip has the hardware brake functions and power feedback function.
MOSFET is the current impact-resistant type, with an internal resistance of 0.003 Euro.
MOSFET channel can be opened quickly to improve the motor's speed curvature, and also brake the motor quickly.
This function can make the car start or stop quickly.
The drive module weighs 15 grams. It can work under the PWM duty cycle of 0% -98%, which a common drive module can not.
Size:6cm x 4.5cm x 1.9cm - 2.36inch x 1.77inch x 0.75inch.
?
Performance parameters:
?
limited Rated voltage: 5V-12V.
Rated current: 50A.
Peak Current: 100A.
Dimensions: length 6.05cm, Width 4.55cm.
Installation: screw connection. Mounting hole spacing: 5.5cm / 4cm (length-wise/width-wise).
?
Control Definition:
Rotate forward: EN = 1, RPWM = PWM, LPWM = 1, DIS = vacant??
Rotate reverse: EN = 1, RPWM = 1, LPWM = PWM, DIS = vacant?
Parking and brake: EN = 1, RPWM = 1, LPWM = 1, DIS = vacant?
Parking but not brake: EN = 0, RPWM = 1, LPWM = 1, DIS = vacant
Prohibit the use: EN = X, RPWM = X, LPWM = X, DIS = 1?
Motor and power wiring:
Package included:
?
1 x?50A motor drive module
?
?
?
?
?
?
?
, , , , , , , ,