| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
This cable will allow you to connect your portable device / HD Video Cameras with a mini-HDMI connector (Type C) to the standard HDMI connector (type A) found on most televisions / LCD's / Plasmas and A/V receivers. You can also use this cable for standard HDMI installations where conduit is a restriction by installing the small mini-HDMI heads in the conduit (9mm head compared to standard HDMI 19mm head) and using a Female mini-HDMI to Male HDMI Adapter on the cable mini-HDMI side to have a HDMI to HDMI Standard Type A Male to male cable.
Note!! When using ANY type of adapter with any hdmi cable will reduce the max signal possible e.g when cable used with an adapter it may not pass 1080p or max resolution supported anymore and resolution will need to be scaled to a lower resolution when using adapters on cables.
Connector Type: HDMI male to HDMI male
Connector Finish: Gold
Gauge: 30AWG
# of conductors: 19
Supported Resolutions: 480i to 1080p
HDMI Certified: Yes
HDCP Compliant: Yes
CEC Compliant: Yes
ROHS Compliant: Yes
HDMI Mini (type C) connectors were released Nov 2007 for connecting HDMI equipped portable devices such as high definition camcorders / Video Cameras.
Please check the HDMI Standards & Specifications section on our website to check what the different versions in HDMI offers regarding picture, sound quality, resolution, colour quality etc.
HDMI CABLES AND EQUIPMENT SHOULD NEVER BE CONNECTED / DISCONNECTED WHILE YOUR EQUIPMENT IS POWERED ON SINCE THE HDMI PORT CARRIES A LOW VOLTAGE BUT CAN CAUSE DAMAGE TO EQUIPMENT WHEN PLUGGED / UNPLUGGED WHILE POWERED ON. The sequence below should be followed when installing new cables or equipment between source/player and LCD / Plasma.
1.) Power-off all equipment (At the wall socket).
2.) Connect all Cables, Splitters, Switches, Extenders within HDMI Distribution Network.
3.) Power on all Splitters, Switches, Extenders within HDMI Distribution Network.
4.) Power on all LCD / Plasma's and set to HDMI input from HDMI Distribution Network.
5.) Power on Sources / Players (Sources negotiates HDCP Handshake via HDMI Network to displays which is set to HDMI input to respond to handshake).
Please check the Home Entertainment Wiring Diagram section on our website for common uses of this cable and for alternative wiring options.
