5.5KVA / 5500W ECCO Hybrid Inverter + 5.12kWh Ecco Lithium Battery + 6x 545W Tier 1 Mono Crystal ...

5.5KVA / 5500W ECCO Hybrid Inverter + 5.12kWh Ecco Lithium Battery + 6x 545W Tier 1 Mono Crystal Solar Panel Combo Kit

The key difference between PWM and MPPT charge control devices is efficiency. MPPT controllers are about 30% more efficient than PWM types. In PWM systems, the panel voltage must match the battery voltage for optimal performance.

High Voltage VDC500V 5.5KVA/5500W 100A Pure Sine Wave Solar Inverter

Features:

• Pure Sine Wave Output: Ensures clean, stable power for sensitive electronics.
• Power Factor 1.0: Maximizes inverter efficiency.
• PV Input Voltage: 60Vdc-500Vdc
• Built-in MPPT 100A: Enhances charge efficiency by 30%.
• Battery-Free Operation: Capable of functioning without a battery.
• RS485 BMS Communication: Seamless integration with battery management systems.
• Lithium Battery Activation: Supports lithium battery activation.
• Detachable Dust Cover: Protects in harsh environments.
• Optional WiFi Remote Monitoring: Allows remote system monitoring.
• Multiple Output Priority: Supports UTL, SOL, SBU, SUB settings.
• EQ Function: Optimizes battery performance and extends lifecycle.
• Parallel Version: Supports parallel operation for increased capacity.

Technical Specifications:

• Rated Power: 5.5KVA / 5500W
• MPPT Voltage Range: Batch 1: 60V 500V DC
• Dimensions: 438mm x 295mm x 105mm
  • Operating Temperature Range: -10°C to 50°C
  • Storage Temperature: -15°C to 50°C
  • Humidity: 5% to 95% Relative Humidity (Non-Condensing)Weight: 9kg
    

    AC INPUT

    • Nominal Voltage: 230VAC
    • Acceptable Voltage Range:
      • 170-280VAC
      • 90-280VAC
    • Frequency: 50/60Hz

    OUTPUT

    • Nominal Voltage: 220/230VAC ±5%
    • Surge Power: 11000VA
    • Frequency: 50/60Hz
    • Waveform: Pure Sine Wave
    • Transfer Time:
      • 10ms
      • 20ms
    • Peak Efficiency:
      • PV to Inverter: 96%
      • Battery to Inverter: 93%
    • Overload Protection:
      • 5s at 150% load
      • 10s at 110% 150% load
    • Crest Factor: 3:1
    • Admissible Power Factor: 0.6 1

    BATTERY

    • Battery Voltage: 48VDC
    • Floating Charge Voltage: 54VDC
    • Overcharge Protection: 63VDC
    • Charging Method: CC / CV
    • Lithium Battery Activation: Yes
    • Lithium Battery Communication: Yes (RS485)

    SOLAR CHARGER & AC CHARGER

    • Solar Charger Type: MPPT
    • Maximum PV Array Power: 5500W
    • Maximum PV Array Open Circuit Voltage: 500VDC
    • PV Array MPPT Voltage Range: 60VDC 500VDC
    • Maximum Solar Input Current: 18A
    • Maximum Solar Charge Current: 100A
    • Maximum AC Charge Current: 80A
    • Maximum Charge Current (PV + AC): 100A

    PHYSICAL DIMENSIONS

    • Unit Dimensions (D × W × H): 438 × 295 × 105 mm
    • Package Dimensions (D × W × H): 560 × 375 × 185 mm
    • Net Weight: 9kg
    • Communication Interface: RS232 + RS485

Battery Specifications:

What's in the Box:

• 1 x ECCO 51.2V 100Ah 5.12kWh Lithium Battery (Wall-Mounted, 5 Years Warranty) (Link to manual)
• 1 x ECCO Hybrid Inverter 48V 5.5KVA 5500W MPPT 100A Inverter Pure Sine Wave (Parallel Version, 5 Years Warranty)
• 6 x 545W Tier 1 Mono (15 Years Product Workmanship Warranty)

Battery Parameters:

• Battery Type: USE
• Bulk Charge Voltage: 56.4V
• Float Charge Voltage: 54.5V
• Cut Off Voltage: 43V
• Charging Amps: 30A

Specifications:

• Nominal Voltage: 51.2V
• Nominal Capacity: 100Ah
• Total Power: 5.12kWh
• Best Operating Voltage Range: 43V-54.5V
• Short Circuit Protection: Yes
• Power-on Reverse Connection Protection: Optional
• Maximum Charging Voltage: 57.6V
• Best Charging Voltage: 56.4V (recommended)
• Maximum Continuous Output Power: 5500W
• Maximum Momentary Output Power: 7500W
• Local Parameter Configuration: Support
• Max Installation Dimension: 480170500mm
• Package Size: 590290615mm
• Weight: 49kg
• IP Class: IP 54
• Communication: RS485, RS232, CAN
• Design Life: 15 years

Important Note: Please note that the courier of solar panels is at your own risk, as the courier does not cover glass items.

Warranties: All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the backup or solar system installation. The installation must comply with SANS 10142 and all its parts. Any warranty claim submitted without installation photos, a valid COC, and proof of installation by a qualified wireman/master electrician can be rejected and will render the warranty claim null and void.