Flycolor Raptor BLS Pro BLHeli_S 30A 2-4S Dshot Brushless ESC‎

Features

• BLHeli-S firmware, FC configurable
• Oneshot/Mutishot/Dshot compatible
• Supports high KV Motors

Technical Specs

• EFM8BB21F16G MCU, pipelined 8-bit C8051 core with 50 MHz maximum operating frequency
• Dedicated high frequency driver for smooth power increase
• Capable of delivering up to 500k eRPM.
• BLHeli-S firmware, designed for superior, brutal performance in multirotors hardware generated motor pwm for smooth throttle response and silent operation.
• Damped light supported; active motor braking gives your quad a locked-in feel. Also capable of active freewheeling for small wings or aircraft.
• Sync loss prevention. There are tuneable parameters that can make the code run well even in the most demanding situations,although default settings will work excellently in normal operating environments.
• The code supports regular analog 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multshot (5-25us). The input signal is automatically detected by the ESC upon power up.
• Supports Dshot150, Dshot300 and Dshot600. Dshot is a digital signal, resilient to interference and does not need additional throttle calibration.
• The silicone twisted-pair of the throttle signal cable increases the service life,and effectively reduces the crosstalk caused by signal transmission, and makes flight more stable, when used with analog signals.

Specifications

• Model Name: Raptor BLS Pro-30A
• Continuous Current: 30A 
• Peak Current: 40A @ 10s
• Cell count: 2-4S
• Weight: 6.2g
• Dimensions: 26.5x13x5mm